Your designs can be prototyped within 72 hours with strong basis of our proficient engineering teams, profound knowledge in thermal management and global technical support.
TCP200 silicone thermal pad has a 2.0 W/mK thermal conductivity for exceptionally low thermal resistance. For greater ease of application and use, the pad's natural inherent tack eliminates the need for an additional adhesive coating that may inhibit thermal performance by increasing interfacial resistance. TCP200 cutting-edge supplier of silicone-based materials for aerospace, aircraft, electronics and photonics industries.
Network Equipement, Mass Storage devices
Highly Stable at extreme Temperature
Required for outstanding heating Transfer
Cooling Module, Thermal module for Special application
Typical Properties of TCP200 Silicone Thermal Pad | |||||||
Properties | Units | TCP200 | Test Method | ||||
Material | --- | Silicone | --- | ||||
Color | --- | Dark Gray | Visual | ||||
Thickness Range | mm | 0.25 to 15 | --- | ||||
Natural tacky (1- or 2-sided) | g/cm3 | 2 | --- | ||||
Hardness | Shore C | 15,25,35 | ASTM E1269 | ||||
Density | g/cc | 2.3 | ASTM E595 | ||||
Continuous Use Temp | ℃ | -40 to 200 | EN344 | ||||
ELECTRICAL | |||||||
Breakdown Voltage(1mmT) | Kv/ac | ≥9 | ASTM D149 | ||||
Volume Impedance | (ohm-cm) | ≥3.6x1013 | ASTM D257 | ||||
Dielectric Constant | 1MHz | 6.0 | ASTM D150 | ||||
Flame Rating | V 0 | UL 94 | |||||
THERMAL | |||||||
Thermal Conductivity | W/m.k | 2.0 | ASTM D5470 |
Configurations Available:
Sheet size:200 x 400mm, 350x350mm , individual parts available
0.50mm thickness material with fiberglass reinforecement
Its soft and compliant resin formulation is suitable for fragile components, and it does not crumble, flake, tear or come apart.
Part No. Code:
Suffix: Different Options For thermal Pad as below
"A1" suffix: One side additional adhesive such as 3M 467, 3M9448
"A2" suffix: Two sides additional adhesive such as 3M 467, 3M9448
"NA" suffix: Natural tacky
"D" suffix: one side tacky and non-tacky on the other side
"M" suffix: Fiberglass reinforcement in the middle layer
"F" suffix: Fiberglass reinforcement on top or bottom layer
We take strict control by means of measuring weight loss to reflect the content ratio within the products. For more detailed information, kindly send enquiries to sales@sg-thermal.com or call us!
Tel.:+86-755-89375091 Fax.:+86-755-89375092 E-mail: sales@sg-thermal.com
Address: 301, Building A, North Plant, No. 103,Pingxin North Road, Mugu Community,Pinghu Street, Longgang District, Shenzhen,China
copyright@2007-2015@SinoGuide Technology Ltd.